Descrizione
Una stringa fotovoltaica fino a 250 V e una corrente di carica fino a 85 A: sono i due numeri che definiscono questo regolatore, cui si aggiunge un rendimento dichiarato del 99%. I morsetti lato pannelli accettano cavi fino a 35 mm² (2 AWG).
La sigla VE.Can segnala l’interfaccia di comunicazione con cui il regolatore si inserisce in un impianto Victron più ampio.
Come gli altri SmartSolar riesce a rimettere in carica batterie ridotte a zero volt ai morsetti, purché gli elementi non siano solfatati in modo permanente o compromessi.
Caratteristiche tecniche
| Protezione IP | IP22 (connection area),IP43 (electronic components) |
|---|---|
| Dimensioni strumento | 295 mm |
| Peso strumento | 4.5 kg |
| Colore luce/CCT | Blue (RAL 5012) |
| Omologazioni e certificazioni | CSA C22.2,EN-IEC 62109-1,UL 1741 |
| Funzioni integrate | True |
| Tensione FV massima | 250 V |
| Temperatura di esercizio | [-30, 60] °C |
| Efficienza | 99 % |
| Corrente di carica/uscita | 85 A |
| PV connection terminal type | Screw terminals 35 mm² (2 AWG) |
| Relay Terminal Connection | Screw terminal 3-pole |
| Remote On Off Terminal Connection | Screw terminal two pole |
| Battery connection terminal type | Screw terminals 35 mm² (2 AWG) |
| Data Stored | Battery voltage,Battery current,Battery temperature,PV voltage,PV current,Load output Current |
| Data Retention Period | 46 d |
| Environmental Condition | Indoor, unconditioned |
| Data Communication | Bluetooth,VE.Direct,VE.Can |
| Charge voltage float | 13.8V / 27.6V / 55.2V (adjustable) |
| Charge voltage absorption | 14.4V / 28.8V / 57.6V (adjustable) |
| Charge algorithm | Multi-stage adaptive (adjustable) |
| Battery voltage | 12V / 24V / 48V Auto Select (software tool needed to select 36V) |
| Temperature Sensor | Internal |
| Temperature Compensation at 48V | -64 mV/°C |
| Temperature Compensation at 24V | -32 mV/°C |
| Pollution Degree | PD3 |
| Number of trackers | 1 |
| Number of synchronised parallel operating units with VE.Can | 25 |
| Programable relay | DPST AC rating: 240VAC / 4A, DC rating: 4A up to 35VDC, 1A up to 60VDC |
| Nominal PV power at 48 V | 4,900 W |
| Nominal PV power at 36V | 3,600 W |
| Nominal PV power at 24 V | 2,400 W |
| Nominal PV power at 12 V | 1,200 W |
| Maximum humidity (non-condensing) | 95 % |
| Temperature Compensation at 12V | -16 mV/°C |
| Start-up PV DC voltage | The PV voltage must exceed Vbat + 5V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1V |
| Self-consumption | Less than 35mA @ 12V / 20mA @ 48V |
| Maximum Altitude | 5,000 |
| Remote on/off terminal | True |
| Protections | Output short-circuit,Excessive temperature,PV reverse polarity |
