Descrizione
La differenza tra un Quattro e un MultiPlus sta negli ingressi: qui ce ne sono due in alternata e l’apparecchio si collega da sé a quello effettivamente attivo, senza bisogno di un commutatore esterno.
Per il resto la dotazione è quella di fascia alta di Victron Energy: inverter a onda sinusoidale pura, carica adattiva, tecnologia ibrida PowerAssist e le funzioni di integrazione che consentono il funzionamento trifase, split-phase e in parallelo. Il modello 12/5000/220-100/100 lavora su banco a 12 V con uscita a 230 V.
Caratteristiche tecniche
| Peso strumento | 34 kg |
|---|---|
| Dimensioni strumento | 350 mm |
| Materiale | Aluminium |
| Protezione IP | IP20 |
| Colore luce/CCT | Blue (RAL 5012) |
| Omologazioni e certificazioni | EN 55014-1,EN 55014-2,EN-IEC 61000-3-2,EN-IEC 61000-3-3,EN-IEC 61000-6-1, EN-IEC 61000-6-2,EN-IEC 61000-6-3 |
| Tensione ingresso | [187, 250] V |
| Tensione uscita | 230 VAC |
| Connettività audio | True |
| Corrente di carica/uscita | 220 A |
| Potenza di uscita sonar | 4,000 W |
| Efficienza | 94 % |
| Temperatura di esercizio | [-20, 60] °C |
| Battery connection terminal type | M8 bolts (two for positive and two for negative connection) |
| AC connection terminal type | M6 bolts |
| VE.bus communication port | Two RJ45 terminals |
| Remote terminal type | Screw terminal two pole |
| Relay terminal type | Screw terminal 3-pole |
| OVCIII Icw | True |
| Pollution degree | 2 |
| Anti-islanding | See our website |
| Automotive directive | ECE R10-4 |
| AC input frequency range | [50, 60] Hz |
| AC output frequency ±0.1% (adjustable) | 50 Hz |
| Nominal battery voltage | 12 V |
| Charge algorithm | Adaptive, 4-stage |
| Charge voltage absorption (adjustable) | 14.4 VDC |
| Charge voltage float (adjustable) | 13.8 VDC |
| Charge voltage storage (adjustable) | 13.2 VDC |
| Communication Port | VE.Bus |
| General purpose communication ports (2x) | True |
| Continuous power at 25°C (Nonlinear load, crest factor 3:1) | 5,000 VA |
| Zero Load Power | 30 W |
| Zero load power in AES mode | 20 W |
| Zero load power in search mode | 10 W |
| Three phase operation | True |
| Fan assisted cooling | True |
| ICW (30ms) | 10,000 A |
| Integrated transfer switch | True |
| Maximum altitude | 2,000 m |
| Maximum AC feed trough current | 2x 100A |
| Maximum humidity (non-condensing) | 95 % |
| Maximum peak AC Output fault current (1 sec) | 53 A |
| Number of AC Inputs | 2 |
| Parallel operation | True |
| Peak power rating | 10,000 W |
| PowerAssist | True |
| PowerControl | True |
| Programmable relay | AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC |
| Protections | Output short-circuit,Overload,High battery voltage,Low battery voltage,Over temperature,AC voltage on inverter output,Excessive DC ripple |
| Remote terminal | On / Off / Charger only |
| Battery temperature sensor | Included |
