Descrizione
Come dice il nome, il MultiPlus mette insieme inverter e caricabatterie. All’inverter a onda sinusoidale pura si affiancano la carica adattiva, la tecnologia ibrida PowerAssist e le funzioni che ne permettono l’integrazione in impianti più ampi.
Questa è la versione 24/3000/70-50 con uscita a 230 VAC. Corpo in alluminio, protezione IP20, rendimento del 94% e peso di 18 kg.
La famiglia si è ampliata verso l’alto con il nuovo modello MultiPlus 20k.
Caratteristiche tecniche
| Dimensioni strumento | 362 mm |
|---|---|
| Protezione IP | IP20 |
| Materiale | Aluminium |
| Peso strumento | 18 kg |
| Colore luce/CCT | Blue (RAL 5012) |
| Omologazioni e certificazioni | EN 55014-1,EN 55014-2,EN-IEC 61000-3-2,EN-IEC 61000-3-3,EN-IEC 61000-6-1, EN-IEC 61000-6-2,EN-IEC 61000-6-3 |
| Corrente di carica/uscita | 4 A |
| Potenza di uscita sonar | 1,700 W |
| Tensione ingresso | 125 V |
| Efficienza | 94 % |
| Connettività audio | True |
| Tensione uscita | 230 VAC |
| Temperatura di esercizio | [-40, 65] °C |
| Battery connection terminal type | M8 bolts (two for positive and two for negative connection) |
| AC connection terminal type | Screw terminals 13 mm² (6 AWG) |
| Relay terminal type | Screw terminal 3-pole |
| Remote terminal type | Screw terminal two pole |
| VE.bus communication port | Two RJ45 terminals |
| OVCIII Icw | 6kA 30mS |
| Pollution degree | 2 |
| Automotive directive | ECE R10-4 |
| Anti-islanding | See our website |
| Starter battery charge output | True |
| Zero load power in AES mode | 15 W |
| Transfer switch AC current rating | 50 A |
| Zero load power in search mode | 10 W |
| Zero Load Power | 20 W |
| Temperature Sensor | Included |
| Three phase operation | True |
| DIP switches for programming | True |
| Fan assisted cooling | True |
| Frequency ±0.1% (selectable) | 50Hz or 60Hz |
| AC input frequency range | [45, 65] Hz |
| Maximum altitude | 2,000 m |
| Maximum humidity (non-condensing) | 95 % |
| Communication Port | VE.Bus |
| Nominal battery voltage | 24 V |
| Charge algorithm | Adaptive, 4-stage |
| Charge voltage absorption (adjustable) | 28.8 VDC |
| Charge voltage float (adjustable) | 27.6 VDC |
| Charge voltage storage (adjustable) | 26.4 VDC |
| General purpose communication port | True |
| Programming via computer or app | True |
| AC output frequency ±0.1% (adjustable) | 50 Hz |
| Continuous power at 25°C (Nonlinear load, crest factor 3:1) | 3,000 VA |
| PowerAssist | True |
| PowerControl | True |
| Power Factor | 1 |
| Programmable relay | AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC |
| Peak power rating | 6,000 W |
| Protections | Output short-circuit,Overload,High battery voltage,Low battery voltage,Over temperature,AC voltage on inverter output,Excessive DC ripple |
| Number of AC Outputs | 2 |
| Maximum peak AC Output fault current (1 sec) | 32 A |
| Number of AC Inputs | 1 |
| Remote terminal | On / Off / Charger only |
| Parallel operation | True |
