Descrizione
Taglia da 100 A della serie SmartSolar VE.Can. L’inseguimento del punto di massima potenza sfrutta al meglio l’energia del campo fotovoltaico e la converte in carica per i banchi batteria.
Una batteria molto scarica non ferma il regolatore, che può partire con tensione di batteria a zero volt se le celle non sono solfatate in modo permanente né danneggiate.
Rendimento fino al 99%, morsetti a vite fino a 35 mm² sul lato batteria e morsettiera a due poli per l’accensione remota. Peso 4,5 kg, IP22 sull’area dei collegamenti e IP43 sull’elettronica, esercizio fra -30 e 60 °C.
Caratteristiche tecniche
| Dimensioni strumento | 246 mm |
|---|---|
| Protezione IP | IP22 (connection area),IP43 (electronic components) |
| Peso strumento | 4.5 kg |
| Colore luce/CCT | Blue (RAL 5012) |
| Omologazioni e certificazioni | CSA C22.2,EN-IEC 62109-1,UL 1741 |
| Efficienza | 99 % |
| Tensione FV massima | 30 A |
| Funzioni integrate | True |
| Corrente di carica/uscita | 100 A |
| Temperatura di esercizio | [-30, 60] °C |
| Battery connection terminal type | Screw terminals 35 mm² (2 AWG) |
| Remote On Off Terminal Connection | Screw terminal two pole |
| Relay Terminal Connection | Screw terminal 3-pole |
| PV connection terminal type | MC4 connectors (two pairs) |
| Data Retention Period | 46 d |
| Data Stored | Battery voltage,Battery current,Battery temperature,PV voltage,PV current,Load output Current |
| Environmental Condition | Indoor, unconditioned |
| Maximum Altitude | 5,000 |
| Nominal PV power at 12 V | 1,450 W |
| Maximum humidity (non-condensing) | 95 % |
| Nominal PV power at 48 V | 5,800 W |
| Battery voltage | 12V / 24V / 48V Auto Select (software tool needed to select 36V) |
| Data Communication | Bluetooth,VE.Direct,VE.Can |
| Charge algorithm | Multi-stage adaptive (adjustable) |
| Charge voltage absorption | 14.4V / 28.8V / 57.6V (adjustable) |
| Charge voltage float | 13.8V / 27.6V / 55.2V (adjustable) |
| Remote on/off terminal | True |
| Protections | Output short-circuit,Excessive temperature,PV reverse polarity |
| Programable relay | DPST AC rating: 240VAC / 4A, DC rating: 4A up to 35VDC, 1A up to 60VDC |
| Self-consumption | Less than 35mA @ 12V / 20mA @ 48V |
| Start-up PV DC voltage | The PV voltage must exceed Vbat + 5V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1V |
| Temperature Compensation at 12V | -16 mV/°C |
| Temperature Compensation at 24V | -32 mV/°C |
| Temperature Compensation at 48V | -64 mV/°C |
| Temperature Sensor | Internal |
| Nominal PV power at 36V | 4,350 W |
| Number of synchronised parallel operating units with VE.Can | 25 |
| Number of trackers | 1 |
| Nominal PV power at 24 V | 2,900 W |
| Pollution Degree | PD3 |
